Product Description
BUCKET ELEVATOR CHAINS AS PER DIN 764 & 766
SPECIFICATION:
- Process of Manufacture: Resistance Butt Welding up to 20 mm Dia and Flash Butt Welding 22 mm and above
- Material: Ni Cr Mo steel
- Heat Treatment: Case Carburized, Double Quenched, Core Refined & Tempered
- Case Depth; 0.1d Tolerance +/- 0.01d up to 26mm Dia 0.1d Tolerance + 0.01d - 0.02d above 26mm Dia
- Surface Hardness: HRC 58 - 62
- Supply Condition: Chains are supplied in matched pairs.
| Nominal diameter d mm | Twitch mm (P) | Outside width (W) mm min | Weight kg/ M | Min breaking load | Pitch of appropriate chain bow with non tooth sprocket (mm) |
| GR 25 (KN) | GR 29 (KN) |
| 10 | 35 | 34 | 2.0 | 40 | 48 | 45 |
| 13 | 45 | 44 | 3.4 | 64 | 76 | 56 |
| 16 | 56 | 54 | 5.2 | 100 | 118 | 63 |
| 18 | 63 | 60 | 6.5 | 125 | 150 | 70 |
| 20 | 70 | 67 | 8.20 | 160 | 190 | 80 |
| 23 | 80 | 77 | 11.0 | 200 | 236 | 91 |
| 26 | 91 | 87 | 14.0 | 250 | 300 | 105 |
| 30 | 105 | 99 | 19.0 | 340 | 400 | 126 |
| 36 | 126 | 119 | 26.5 | 500 | 600 | 147 |
| Nominal diameter d mm | Twitch mm (P) | Outside width (W) mm min | Weight kg/ M | Min breaking load |
| GR 25 (KN) | GR 29 (KN) |
| 10 | 28 | 34 | 2.2 | 40 | 48 |
| 13 | 26 | 44 | 3.7 | 64 | 76 |
| 16 | 45 | 54 | 5.8 | 100 | 118 |
| 18 | 50 | 60 | 7.4 | 125 | 150 |
| 20 | 56 | 64 | 9.0 | 160 | 190 |
| 23 | 64 | 77 | 12.0 | 200 | 236 |
| 26 | 73 | 87 | 15.0 | 250 | 300 |
| 30 | 84 | 101 | 20.2 | 340 | 400 |
| 36 | 101 | 122 | 29.0 | 500 | 600 |
Send Inquiry
Send Inquiry
Send SMS
